Pearl cotton is a new type of packing material for express delivery, which is composed of numerous independent bubbles produced by physical foaming of low-density polyethylene, as one of the new environmentally friendly packaging materials, the polyethylene foams hold many features, like lightweight, moisture-proof, shockproof and recyclable, which can protect your products effectively.
This new pe foam overcomes the disadvantage of fragile deformation and poor recovery of common foamed glue and has many advantages, such as waterproof, shockproof, sound insulation, thermal insulation, plasticity, good toughness, strong recycling, environmental protection, strong impact resistance, and so on, as well as the polyethylene foam sheets also has good chemical resistance, which is an ideal substitute for traditional packing materials and is widely used in car seat cushion, pillow, electronic appliance, instrument, computer and so on.
Through the special process of raw material processing into ball cotton, these closed-cell polyethylene foam are similar to a sponge in shape, however, the cross polyethylene foams are more delicate than a sponge and more exquisite in appearance. As a famous green packaging materials supplier, Shie’s kinds of high-density polyethylene foam not only have health and environmental protection but also have packaging function and high performance.
Shie’s Polyethylene Foams’ Development
Always insist on tech innovation, Shie took a lot of hard work. As one of the popular and influential packaging manufacturers, Shie research and development the new materials and processing technology of polyethylene all the time, in order to find more excellent performance materials for polyethylene foam sheets near me, and the use of these high-performance materials to achieve the reduction of packaging materials. We try our best to promote the progress and development of new products and application technology of plastic auxiliaries of polyethylene foam blocks, in the assurance these polyethylene foam sheets near me non-toxic, health and environmental protection, using low-cost technology to improve the performance of these polyethylene foam density and to provide the possibility of reduction.
Specifications:
Thickness: 0.5-8mm
Width: Customized
Material: PE/EPE
Specifications:
Thickness: 0.5-8mm
Width: Customized
Material: PE/EPE
Over these years we have improved the technology of polyethylene foam board recycling and processing, making the recycling rate of pe foam sheets materials are greatly increased, at the same time, improve and eliminate the hidden danger of white pollution caused by plastic packaging materials, and enhance the utilization rate of resources. Shie also develops intelligent and other advanced packaging technology methods, makes full use of the characteristics of edible and water solubility of polyethylene foam sheets bulk near me, then reducing the amount of wasted packaging, and improves the safety and environmental protection performance of low-density polyethylene foam.
10 Unique Features of Polyethylene Foams in Shie
1. These polyethylene foam cylinders are 40 times high foam-forming products, they all hold lightweight and a certain firmness.
2. Good softness and cushioning of polyethylene foams.
3. Very low thermal conductivity and excellent insulation.
4. Using independent bubble foam materials, plastazote foam suppliers almost haven’t water-absorbent waterproof materials.
Click Here Now to Know Price and More Detail!
5. High foaming and excellent waterproof, so that these closed cell pe foams have a strong buoyancy.
6. The pe foam 10mm isn’t corroded by various drugs and is a kind of corrosion-resistant material.
7. Shie’s pe foam board holds superior weather resistance, which is hardly affected at all by various climatic conditions.
8. Excellent processing technology of Shie’s cross-linked pe foam, which includes great cutting adhesive extrusion, vacuum forming, compression forming, and other machinability.
9. The surface of Shie’s extruded polyethylene foam with fine bubble materials, which are smooth and can be colored beautifully.
10. These brilliant buoyant polyethylene foam can produce flame retardant products through processing, and also can be used to prevent static electricity treatment.
Click Here Now to Know Price and More Detail!
Polyethylene Foams Wide Usage Range
Compared with ordinary foaming materials, pe foam density enjoy better recovery and isn’t easy to break and denaturation. Due to lots of advantages of waterproof, moistureproof and shock absorption, polyethylene foam packaging are widely used in the various industrial industry. At the same time, polyethylene foam manufacturers’ materials’ excellent plasticity and toughness, as well as high recyclability will also extend their usage ranges. Look at the following to know more details now.
1.In view of the good physical properties of polyethylene foam rolls, they are now widely used in car cushions, pillows, computer, audio, medical equipment, hardware industry, handicrafts, glass, ceramics, furniture, furniture, gift packaging, lining, lifejacket, and other life-saving products, daily necessities and other different industries.
2.Sometimes, closed-cell polyethylene foam can also be boned with a variety of fabrics to form kinds of composite materials, and have a good application in home decoration, for example, combine cross-linked polyethylene foam manufacturers and aluminum foil structure will own an excellent anti-infrared ultraviolet ability, which can be used for shading air conditioning products.
Click Here Now to Know Price and More Detail!
3. Compared with EPS foam, black polyethylene foam has a good recycling capacity, and can’t create a little pollution to our environment, as well as can be recycled repeatedly. Because of the white pollution caused by EPS, now most countries have banned the import and export of EPS, so poly lam packing foams products have a high possibility replace EPS and occupy the foam market in the future
4. Fragile goods such as porcelain bowls, porcelain cups, glasses, glass products, handicrafts
5. Fruit. Polyethylene packing foams are non-toxic, tasteless, easy to recycle, and have good shock absorption, which will level up your fruit brand image.
6. Industrial parts, such as precision parts, aerospace parts, etc, both of all need the polyethylene foam price, other products are either smelly, or insufficient toughness, or have insufficient support, pe foam packaging can be said to cover all aspects
7. Electron production. Due to polyethylene sponge amazon can be processed as anti-static, which can’t scratch these electronic products, and pe foams’ great performance can stuck product greatly.
In the packaging industry, polyethylene foam planks is more beautiful than traditional packaging materials, but also more hygienic, plus it is non-toxic performance, the market of closed cell expanded polyethylene foam in the packaging field is increasing year by year.
How to Cut Polyethylene Foams Best
The wide application of pe foam 5mm is inseparable from the special-shaped cutting equipment. With the increased demand of pe foam 5mm, and the growing market, if you want to stand out in such a market, a piece of cutting equipment with excellent performance is essential.
Specifications:
Thickness: 0.5-10mm
Width: Customized
Material: PE/EPE
Specifications:
Thickness: 0.5-8mm
Width: Customized
Material: PE/EPE
There are almost 3 types of special-shaped cutting equipment most commonly used for pe foam material, they are laser machine, wire cutting machine, and vibration knife cutting machine
Because the smoke and smell produced by the laser machine under high temperature do not meet the national environmental standards, it is now used very little nowadays.
Because of the high accuracy and efficiency, wire cutting machine is now widely used in the cross-linked polyethylene foam sheets cutting industry, but for some drilling operations that need to lead and other special operations, it is also a little troublesome.
Vibration cutting machine is a piece of new cutting equipment, from the point of cutting speed, it is a lot faster than the cutting equipment, as well as precise cutting accuracy and multi-axis control system, when vibration with a high-frequency knife, letting the irregular cut with ease. As well as a complete set of intelligent layout systems can effectively avoid the problem of material waste caused by inappropriate typesetting.
The only drawback of vibration cutting machine for cross-linked polyethylene foam sheets is the thickness, which can only cut up to 15cm thick material, and we also need the line cutting machine for those particularly thick polyethylene foam material.
How to Distinguish the Quality of Polyethylene Foams
1. See The Softness of Polyethylene Foams
Usually, black pe foam holds great soft properties, the better the quality, the higher the softness, which offer a wonderful cushioning effect for your products, even when squeezed, Shie’s first-class foamed pe can quickly recover their elasticity, overcome the shortcomings of fragile, deformation and poor recovery, Shie’s polyethylene foam pad can protect our goods from oppression and destroyed effectively.
Specifications:
Thickness: 0.5-8mm
Width: Customized
Material: PE/EPE
Specifications:
Thickness: 0.5-8mm
Width: Customized
Material: PE/EPE
2.Look at The Heat Insulation
We all know that some items need to maintain an inherent temperature in the process of transportation. If cannot reach the required temperature, not only will the items be damaged, but also cause unnecessary disputes. Good quality anti-static polyethylene foams of Shie can play their heat insulation advantages, making the transport goods arrive safely
3. See The Waterproof Performance of Polyethylene Foams
As a super packaging material, no matter what the weather in the transportation, the polyethylene styrofoams can protect the products very well, and prevent them from damage outside. As an independent foam material, Shie’s fantastic 2 polyethylene foams are waterproof and moisture-proof.
Other 5 Ways to Pick Up Your Great Polyethylene Foams
1. Look at non-cross-linked polyethylene foams’ shape and color. Generally speaking, these high-density pe foams own more precise air beads inside, resulting in a smaller distance between two air beads. Second, see polyethylene foams’ color is clean or not, which can explain the material quality, commonly, the cleaner the color, the higher the quality. Then see if they are glued firmly and in place, whether there is some leakage of glue, if the answer is no, then they are maybe good polyethylene foam for sale.
2. Do the fall test, because the laminated polyethylene foams have the function of protecting products, so they should play an important role to protected small products according to a certain height. Only these cross-linked closed-cell foam that owns great protection function can be regarded as great packaging materials.
3. Use the tool to measure your polyethylene structural foams. In the production, because of the change of weather and temperature fluctuations, there will be some little error with the actual size, so during the process of production, the general manufacturer like Shie will make the actual buy polyethylene foam size less than the drawing specifications of 2 or 3 mm, or even 5MM, sometimes less. Then we should use the caliper to measure. Besides, there is also another way to measure the density of polyethylene buoyancy foam, that is, to calculate its weight in pounds. The density unit of polyethylene foam is KG/ cubic meter. If this ratio is larger, the higher its density and the better its hardness, on the contrary, the worse its protective performance.
4. Pay attention to the surface microporous of polyethylene foams slime. When selecting the pe foam price, we should try to choose these with good viscosity, that is, the micropores can’t be too big or no. Similar to the first method, we can judge the quality of high-density polyethylene foams by looking at the size of their micropores, so that assured to use these selected polyethylene foams 3mm.
5.Consider wettability of epe polyethylene foam. When selecting these closed-cell polyethylene foams’ r-value, we’d better don’t choose these wet polyethylene foam inserts. Once there is a wet situation may lead to esd pe foams’ adhesion is bad and affect their usage time to a certain extent.
In the selection of pearl cotton, try not to choose the wet pearl cotton once there is a wet situation that may lead to its adhesion is not so good, to a certain extent may affect the use of time
Hoping these 5 points above will help you choose your satisfying first-class Eva pe foams, any problem related to pe foam blocks, don’t hesitate to contact us, and our customer service will offer you comprehensive service 24/7.
Which Hold Great Shock Proof Between Bubble Wrap and PE Foams?
1. Generally speaking, pe foams material’s budget is higher than bubble wraps.
2. The shockproof effect of these pe foams whose thickness is more than 1cm is better than bubble wraps, however, the cost of PE materials also will be 20 percent higher.
So we can’t absolutely say which is good or not only on one aspect, we should choose them according to the actual use and budget. Still, have no idea to choose your perfect polyethylene terephthalate foam materials? Send your information and get our professional and free suggestions now.
In a word, with 40 years of rich experience, Shie is able to offer you soft and high-quality custom polyethylene foams, large stock for your urgent usage, and customized service for your other requirements, fast shipping, and competitive price, 24/7 customer service, Shie packaging product supplier always be your smart choice.
Besides these excellent polyethylene foams for sale, Shie’s other factory also offers you kinds of boxes made of corrugated and cardboard, as well as kinds of eco-friendly papers, cardboard trays, bubble wraps, and sorts of bags, visit now to choose your favorite.
